Advantages One, light body is very small
LED lights will be very small, very fine led wafer encapsulated in transparent epoxy, so it is very small, very lightweight, in the production and application can save a lot of material and space.
Two advantages, very low energy consumption
The working voltage of the LED lamp is generally only $number. 6V, the working current is only 0.02~0.03A. That is to say: it consumes less than 0 of electricity. 1W, the consumption of electricity than the same light efficiency of the incandescent lamp less than 90%, less than 70% of energy-saving lamps. Therefore, only the LED can be called the real energy-saving light source!
Three advantages, strong and durable
The LED chip is completely encapsulated inside the epoxy resin. The small size of the epoxy resin particles are very difficult to break, the whole lamp body also has no loose parts, the inside of the chip is very difficult to break, but also a few thermal effects may be volatile, fusing. These features make the LED hard to damage. Compared to ordinary bulbs, fluorescent lamps, the LED is impregnable, solid without several times, durable no more than a few times.
Advantage four, LED lamp service life is long
In the appropriate current and voltage, LED lamp life can reach 100,000 hours, that is, theoretically product life of more than 10 years, compared with other types of lamps have a longer service life.
Advantage five, safe low voltage
LED lights use Low-voltage DC power supply (AC Rectifier for DC), the supply voltage between 6~24v, due to different products and differences. In short, it applies a more secure DC power than a high-voltage power supply, especially for homes and public places.
Six advantages and wide application
Because of compact, each unit led small piece is 3~5mm square or the circle, therefore is more suitable for the preparation modelling craft complex device. For example, the manufacture of soft, can be curved lamp, lamp belt, shaped snuff, currently only led suitable.
Seven advantages and richer colors
Before the market on the lamp color is very single, to achieve color purposes, one is to paint the surface of the lamp or cover the color film, the second is in the lamp filled with inert gas luminous, so the richness of the color is limited. LED is digital control, light-emitting chip can emit a variety of colors, including red, green, blue ternary color, it is with this ternary color, through the system controls, can restore the boundless world of colorful.
Eight advantages, less heat distribution
LED is more advanced cold light source, it is not like incandescent lamp, fluorescent lamp radiation a large amount of infrared and ultraviolet rays, especially applicable to cultural relics, jewelry, high-grade cosmetics and other valuable lighting. There is almost no incandescent electric current heat effect, will not be affected by the expansion and contraction of the bubble. Will not make the bulb yellow, will not make the lamp accelerated aging, will not constitute a greenhouse effect on the surrounding environment.
Nine advantages, less environmental pollution
LED for the protection of the environment is mainly manifested in three aspects:
Firstly, there is no harm of metal mercury. The LED lamp does not use the high hazard mercury like the fluorescent lamp, does not appear in the bulb manufacture process or may leak the mercury ion, the fluorescent powder and so on the public harm event.
Second, the manufacture of LED epoxy resin belong to organic macromolecule, cured with good physical and chemical properties, wafer, metal bonding strength, hard and flexible, alkali and most of the solvent stability, not easy damage, even if damaged or aging can be recycled after reuse, will not pollute the environment.
The three, LED lamps and display of the particle layout, the resulting light is generally scattered, rarely produce light pollution.
Ten advantages, more cost savings
Next: No Information